Water & Outdoor Installation Guide

⚠
220V strip lights are not for pools, ponds or standing waterMesmerize 220V strip lights, ropelights and neon flex must never be installed in or near swimming pools, ponds, fountains, water features or anywhere water can collect – even if the product is IP65-rated.

Why IP65 Is Not Enough

IP65
Dust-tight and protected against water jets and rain. Not for submersion or standing water.
IP67
Protected against temporary immersion (up to 1m for 30 minutes). Not for permanent submersion.
IP68
Rated for continuous submersion, as specified by the manufacturer.

An IP rating describes the product housing only. It does not make a mains-voltage product safe around pools. Pool chemicals, constant moisture and pooling water break down the seals and cause early failure.

The Safety Risk

220V mains voltage in or near water can cause electric shock, serious injury or death.

SANS 10142-1 sets strict zones around swimming pools and similar locations, and generally requires safety extra-low voltage (SELV) – typically 12V or 24V – in the zones closest to the water.

What to Use Instead

  • Use a suitably rated 12V or 24V IP68 product
  • Power it with an appropriate isolating driver, installed outside the pool zones
  • Have it installed by a registered electrician in line with SANS 10142-1

Ask our team for the right product

Warranty

Products installed in or around swimming pools, ponds, water features or areas exposed to standing water or pool chemicals are excluded from warranty, regardless of IP rating.

See our Returns, Refunds & Warranty Policy.

Table of Contents